Put Mortal Kombat 1 into Street Fighter Cab

[matrix00]

I have a Street Fighter 2 CE cab, that I want to put Mortal Kombat 1 in. I don't want to splice wires and screw things up, because I still play Street Fighter 2 in it and just want to be able to swap them out.

Is there any easy way to wire the Mortal Kombat 1 PCB up to my current Street Fighter two set up?


Thanks for any and all help.

[BobA]

I think the CPS 1 is basically a jamma connector so all you would have to do is adapt the MK1 kick harness to the SF kick harness. 

[Malenko]

I think the CPS 1 is basically a jamma connector so all you would have to do is adapt the MK1 kick harness to the SF kick harness. 

if you plug MK into the SF cab the punch buttons will be high punch, block, and high kick. You would have to make it so the SF harness plugs into the MK kick harness, or do something like this:

http://www.jamma-nation-x.com/jammax/multikickharness.html

[matrix00]

Thanks for the help

[ctozzi]

just get this to simplify the process:

http://www.jammaboards.com/store/mk1-kick-harness/prod_82.html

[matrix00]

I will get that, they are of stuck though right now. Thanks for the link.