WTD: Namco gun holster

[Franco B]

I need another one of these. I can get them new from Namco but I thought I would see if anyone has a spare one kicking about first.



Note: It has to be one of these exact ones, not one of the smaller Happ ones etc.

[Q*Bert_OP]

If the ones from a Time Crisis 2 will fit, and I can just unbolt them, I have a pair.

[Franco B]

Hey Q*Bert, thanks for the message. 

Does your TC2 machine look like this?



If so then I don't think it will have them. I thought it may possibly have them embedded inside the large plastic housings but I have just looked through the TC2 manual and I can't seem to see them or see reference of the 45000199 part number for them.

The holster pictured im my original post is one I got from a machine that had been converted to the first Time Crisis. The same holders are also used on Point Blank machines. If you machine is a conversion then it may very well have them.

Let me know if you think you have those ones. I only need one but if you don't want to split them then I understand.

I would need it/them shipped to the UK. They will most likely need grit blasting and respraying, mine does at least anyway so I'll need to take all of this into account vs buying some new from Namco UK.

[Q*Bert_OP]

I'll have a look tomorrow. I know they are attached to the metal control panel, but I don't know if they're welded on or just bolted.

Yeah, they would be coming from a dedicated TC2 like the one in that picture...I would have tossed the control pedestal already if I was able to fit it in the dumpster, but it couldn't be smashed appart.

If what I have would work, you can have it as long as you pay shipping from the US.

[Franco B]

That's very kind of you 

Let me know how you get on. I need the holsters for a custom gun panel I'm making for my candies so even if they are not the ones above I may still be able to use them seeing as you have a pair.

Thanks again 

[Q*Bert_OP]

Yes, they are removable, but not quite the same as what you have as far as mounting. These were meant to fit the standard Namco recoil guns.

[Franco B]

Thanks for that, its much appreciated! 

Looking at that, I think I could get them to work.

Let me know what shipping to the UK would be, as long as it's not extortionate I would love to take them. I'll shoot you some extra beer tokens for your time.