Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: IPAC - few questions  (Read 1550 times)

0 Members and 1 Guest are viewing this topic.

mike_bike_kite

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • Last login:January 07, 2023, 05:16:39 am
IPAC - few questions
« on: December 12, 2011, 04:41:11 am »
I'm just about to wire up the CP on my 3rd cab. I've taken apart the bits and pieces from my first cab built years ago. I want to use the IPAC button controller but there are various versions of the IPAC out there and each uses different software to program them (I just want to define alternative keys when the shift button is pressed).

How do I tell what version/age of IPAC I have?

Do I need any special wiring to program them? it's been a good few years since I built my last cab and my minds gone blank.

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: IPAC - few questions
« Reply #1 on: December 12, 2011, 08:30:49 pm »
Post a picture of your iPac and maybe someone can identify it for you.


mike_bike_kite

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • Last login:January 07, 2023, 05:16:39 am
Re: IPAC - few questions
« Reply #2 on: December 14, 2011, 04:29:10 am »
Sorry for delay

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: IPAC - few questions
« Reply #3 on: December 14, 2011, 06:50:42 pm »
This version would use the current WinIPAC software version, downloadable from http://www.ultimarc.com/download.html

Drop me an email if any problems.

andy@ultimarc.com

mike_bike_kite

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • Last login:January 07, 2023, 05:16:39 am
Re: IPAC - few questions
« Reply #4 on: December 15, 2011, 03:39:12 am »
Many thanks !