Author Topic: Which Molex Connector/Pins? (Pac to JAMMA Adapter) (Read 1266 times)

wxforecaster · « **on:** October 21, 2011, 09:01:20 pm »

I purchased a Pacman to Jamma adapter here:
http://www.jammaboards.com/store/jamma-pcb-to-pacman-cabinet-adapter/prod_273.html

Unfortunately, the the product fails to mention what size the molex connector/pins are. The adapter arrived today and clearly my standard .156 molex connectors/pins are too widely spaced to fit.

Does anyone have one of these that can tell me which molex connectors/pins I need to buy?

Evan

MonMotha · « **Reply #1 on:** October 22, 2011, 01:42:31 am »

It looks like a standard 0.1" KK for the IO header. That's what most of Jammaboards' products use.

The other connector is obviously a PC HDD power connector.

wxforecaster · « **Reply #2 on:** October 22, 2011, 08:56:20 am »

That's what I needed to confirm! Thanks!

-E


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Which Molex Connector/Pins? (Pac to JAMMA Adapter) (Read 1266 times)

wxforecaster

Which Molex Connector/Pins? (Pac to JAMMA Adapter)

MonMotha

Re: Which Molex Connector/Pins? (Pac to JAMMA Adapter)

wxforecaster

Re: Which Molex Connector/Pins? (Pac to JAMMA Adapter)