Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Happ Trackball Help  (Read 1476 times)

0 Members and 1 Guest are viewing this topic.

acevedor2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 380
  • Last login:May 25, 2024, 08:21:24 pm
Happ Trackball Help
« on: September 06, 2011, 11:01:49 pm »
Hey guys,
I have a MAME cab with a 3: Happ illuminated trackball.  It won't spin up - just left and right.  It will physically spin, but the cursor only registers going left or right.  The mouse spins freely and I don't feel any binding.  I took it apart and did not see anything unusual.  It is connected via usb.  It was working fine until the other day.  It is pretty much in new condition.  Built the cab a year or two ago, but no kidding have played only a dozen times.  Any ideas where I should check?  The encoder wheels seem  to spin fine.  Thanks!
Dedicated - Working:
Asteroids Deluxe
Firefox
Galaxian
Pacman
Viruta Fighter 2
Zombie Raid
Pool Sharks - Pinball

Projects:
Pole Position
Pole Position 2

phatmeat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • Last login:May 25, 2013, 12:08:55 am
Re: Happ Trackball Help
« Reply #1 on: September 06, 2011, 11:31:28 pm »
One of my boards crapped out and did the same thing. I had the green boards and purchased the red boards and everything is fine.  Some say that not grounding them fries the board.

acevedor2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 380
  • Last login:May 25, 2024, 08:21:24 pm
Re: Happ Trackball Help
« Reply #2 on: September 06, 2011, 11:38:26 pm »
Thanks! That very well may be it.  The light did short out on it - that might have fried the boards.  Where did you get the replacement boards?  I have the green ones as well.
Dedicated - Working:
Asteroids Deluxe
Firefox
Galaxian
Pacman
Viruta Fighter 2
Zombie Raid
Pool Sharks - Pinball

Projects:
Pole Position
Pole Position 2

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Happ Trackball Help
« Reply #3 on: September 07, 2011, 10:23:14 am »
Twisted Quarter has replacement boards but if you have the USB interface you may need the kit with interface on a large board and smaller board.  The USB kit has 2 different sized boards while the boards for green/red replacement are the same size and need something to connect to like an optipac or optiwiz.

The difference in price for 2 same size boards for $40 or whole USB 2 board kit $44.

Twisted Quarter

Divemaster in Buy and Sell also handles Happs Trackballs and maybe able to give you a price.