Author Topic: Any interest in original cab dimensions (Read 110538 times)

conseit68 · « **Reply #320 on:** April 23, 2005, 11:52:25 am »

oh oh...please do measure. i have searched high and low for dimensions and to no avail. thanks greatly

crsdawg · « **Reply #321 on:** April 24, 2005, 02:27:10 pm »

i've got no problem making the measurements but jakobud will have to help. he's very good at making the plans and i'm horrible at it. it's quite a bit of work to get it right and make it easy to understand. which is one of the reasons his site is such a good addition to the community. i can't volunteer his effort, but if he's willing then it'll get done.

i'll have my game out in the garage and in pieces in mid may, so that's as soon as it will happen.

kcorcoran · « **Reply #322 on:** April 24, 2005, 10:17:17 pm »

I'm interested in finding some detailed plans / dimensions for a dedicated UNIVERSAL cabinet.

I'm looking to build a dedicated Mr Do from scratch. Haven't been able to find a nice clean cabinet for my Mr Do board.

Jakobud · « **Reply #323 on:** April 25, 2005, 03:50:34 am »

Quote from: crsdawg on April 24, 2005, 02:27:10 pm

i've got no problem making the measurements but jakobud will have to help. he's very good at making the plans and i'm horrible at it. it's quite a bit of work to get it right and make it easy to understand. which is one of the reasons his site is such a good addition to the community. i can't volunteer his effort, but if he's willing then it'll get done.

i'll have my game out in the garage and in pieces in mid may, so that's as soon as it will happen.

Okay I will keep this in mind and get ahold of you for it. Keep in mind guys, the Tron cab, around the inner bezel area, has a lot of molded plastic that will be extremely difficult to reproduce (let alone difficult to draw out plans for).

NickS · « **Reply #324 on:** June 22, 2005, 04:17:53 pm »

Hello,

I hope this project is still going strong. It has been a very useful resource.

I was wondering if anyone can provide dimesions (or even part dimensions) for a Track and Field (Hyper Sports/Tetris)upright and a Phoenix (Centuri style, Time Pilot etc) upright.

Any help would be greatly appreciated.

BlueSky · « **Reply #325 on:** August 08, 2005, 09:55:59 am »

Pole Position Sit down cabinet plans. I would be most appreciative if you have ANY dimensions available on the sit down cabinet.

KonkeyKong · « **Reply #326 on:** January 10, 2006, 05:28:44 pm »

looking for some Robotron upright plans/measurements, want to build a dedicated Robotron from scratch.

WaRpEd · « **Reply #327 on:** February 13, 2006, 11:13:30 pm »

Does anyone have dimensions on a Gauntlet Legends cab the 4 player with overhead marquee I won a Vegas board on EBay with legends in it and there isn't one in my Area to measure. I need the Cp and front coin area dimensions. Thanks

Masterful Gaze · « **Reply #328 on:** May 06, 2006, 07:02:27 pm »

Jakobud's site seems to be down. Was his site moved somewhere else or mirrored maybe?

horseboy · « **Reply #329 on:** May 06, 2006, 07:17:49 pm »

About 20 threads down on the list

http://forum.arcadecontrols.com/index.php?topic=53311.0

danny_galaga · « **Reply #330 on:** May 07, 2006, 04:39:32 am »

im amazed no one has dimensions for asteroids and space invaders! my own research has given a fairly good picture of asteroids (thanks to cheffojeffo and ascar9

). here are the asteroids info so far:

http://forum.arcadecontrols.com/index.php?topic=39916.0

i have a few more measurements to add to the drawing, i just havent had a chance to update it. talking of which it looks like jakobuds gone for good?

so ive covered asteroids, anyone got any space invaders dimensions?

CheffoJeffo · « **Reply #331 on:** May 07, 2006, 10:10:47 am »

FWIW, I have now mirrored zorg's mirror of the EPS files:

http://happycampers.to/arcade/jakobud

Cheers.

MinerAl · « **Reply #332 on:** May 07, 2006, 10:30:25 am »

CJ: could you do some rough measurements of your tron? doesn't have to be a full drawing, just need the basic measurements.

I have something cool in mind...

CheffoJeffo · « **Reply #333 on:** May 07, 2006, 10:40:38 am »

Quote from: MinerAl on May 07, 2006, 10:30:25 am

CJ: could you do some rough measurements of your tron? doesn't have to be a full drawing, just need the basic measurements.

I have something cool in mind...

Sure ... just ask DG how great my turn around time is ...

(sorry, again, DG)

Seriously, so long as you aren't looking for the shroud angles and measurements, it shouldn't be a problem. I won't be able to get to it until after Mother's Day, but am rearranging machines shortly thereafter (cleared out a wall of furniture ... more room for cabinets!), so can put a tape to it (and thankfully, it is a pretty easy cab to measure).

If you don't hear from me, just PM me to remind me ... and repeat until completion.

Cheers.

EDIT for spelling

JoyMonkey · « **Reply #334 on:** July 27, 2006, 11:46:47 am »

Here's a WIP of Taito plans based on Wade's dimensions that he got while Spriggy was putting together the Taito sideart (see the references panel in the PDF).
I'm missing a few dimensions, so I'm sort of stuck now.

Anyone out there able to take some Taito cab dimensions for me?

SeaMonkey · « **Reply #335 on:** November 14, 2006, 04:50:42 pm »

I would be willing to pay for plans for a Gun Cab for Positional Guns.
I have a set of Revolution X guns, so if I had plans for T2, or some similar that would be very helpful.

johnm160 · « **Reply #336 on:** November 15, 2006, 09:30:31 am »

Quote from: CheffoJeffo on May 07, 2006, 10:10:47 am

FWIW, I have now mirrored zorg's mirror of the EPS files:

http://happycampers.to/arcade/jakobud

Cheers.

Humm, I was thinking of doing that myself. LOL I was thinking I could not live if all those plans disappeared.

one8seven · « **Reply #337 on:** January 05, 2012, 02:59:51 pm »

Quote from: spidermonkey on September 11, 2003, 02:04:05 am

I can pitch in with dimentions as I have an Asteroids and a Mortal Combat 4. Both full size uprights.

Can you send me the dimensions (inside) of your MK 4 cabinet please? (for monitor install)

ShaggyNerd · « **Reply #338 on:** January 06, 2012, 04:23:41 pm »

Can I have dimensions for Pac-Man, please? With details of the inside, too, of course.

CheffoJeffo · « **Reply #339 on:** January 06, 2012, 06:04:38 pm »

Holy necro resurrection!

cloisterbell · « **Reply #340 on:** August 26, 2012, 11:11:31 pm »

Hi,

I'm trying to make a Double Dragon cabinet, and cannot find comprehensive plans anywhere on the net.
Have looked on the excellent Jakobud website, and require something similar with front and side views.

Any help would be greatly appreciated.

Cheers,
Andrew

mgb · « **Reply #341 on:** August 26, 2012, 11:52:12 pm »

Welcome this is a really old thread but one idea for you to start to work out those measurements is download and take a little time to learn Sketchup and look up Double Dragon cabinet in sketchup downloads (its there somewhere) then using the measurement tool, you can get some measurements off there.

PL1 · « **Reply #342 on:** August 27, 2012, 03:23:10 pm »

If you want to try mgb's advice, look at the Arcade cabinets by Gozer sketchup list.

Double Dragon Cab Sketchup.

Scott

mgb · « **Reply #343 on:** August 27, 2012, 07:25:30 pm »

Quote from: PL1 on August 27, 2012, 03:23:10 pm

If you want to try mgb's advice, look at the Arcade cabinets by Gozer sketchup list.

Double Dragon Cab Sketchup.

Scott

Yeah thats the one, Gozer's measurements are pretty right on.

cloisterbell · « **Reply #344 on:** August 29, 2012, 02:09:15 am »

Cheers mgb and PL1, that was precisely the sort of thing I was looking for.
I've done some design work in Sketchup previously, so it should be a piece of cake to get the angles/measurements I need now.

Already sourced the correct Marquee, Monitor Bezel and Control Overlay.
Just need to sort out the Taito Logo/Design on the side now and I will be set.

Thanks again guys.
Andrew


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news