Spriggy, I'll be able to get everything but the cp (don't have it but can see where it was). I'll be looking for those side stencils as soon as I cut some wood... Maybe it would be easier for me to fill in the blanks you have? I could charge the digicam if needed.
CC,
As you would have read on my Taito Sideart thread, the artwork is on hold due to Wade's and mine current projects (both T&F cocktails).
As I aforementioned, I'm waiting on parts for measurement. IE CP, Rear Door Hinges, Marquee Brackets, Plastic Bezel and Bezel Brackets and Coin Door.
If your eager, you could gather these dimensions (and angles) and send them to me to assit. I'm expecting the parts to arrive within the next fortnight!?! if your willing to wait.
As for the Taito Sideart, you could use it in it's current inaccurate state (in Wade's and my eyes anyway) as a template to cut the sides and then use it as a stencil or vinyl overlay without inaccuracy. The main cabinet side outline on the sideart has been quoted as accurate, EXCEPT for the main large curve which is out some what.
I can not tell you what the Sideart, in it's current state, will look like if applied on an ORIGINAL cabinet.
Once the plans are completed, they will be given to Jakobud for him to use in which ever way he choses. I will however ask him if he could attach the Sideart (when completed) to the plans so it can be used as a template and/or later used as accurate artwork (especially as the dimensions for the cabinet sides are based on the Sideart stencil for accuracy)
The plans are still at this stage.......