i-pac4 problem

[BigBri]

i don't know how this can be software related, but after i installed xp pro(full), every button and joy seem to sometimes register twice although i hit it once.  so i checked my wiring like 10 times and couldn't find anything that could be causing this.  i then decided to just rip all the wires and start over, testing a few microswitches....only to find that it's still messed up.  it's very annoying when i'm in arcade jukebox trying to que in a tune and it's a chore, know what i'm sayin'?
thanks for your help, my fans

[walls83]

have you went in and checked to see if your buttons are doubled up..? If you go into mame and check the buttons you can check it.

[BigBri]

well, i removed all wires and checked one microswitch here, one switch there.  i'm doing one at a time and getting problems.  i can't have 40 bad microswitches

[tmasman]

well, i removed all wires and checked one microswitch here, one switch there.  i'm doing one at a time and getting problems.  i can't have 40 bad microswitches

If you're saying you're testing the connections over the IPAC, then try testing the switches with just a multimeter... I seriously doubt that your microswitches are bad (at least no all of them).

You might just have a problem with the IPAC. They would probably replace it if that's the case.

[grafixmonkey]

and check you're on the NO terminals not the NC terminals...  thought someone had a prob with double presses once and it was cuz of that.  That's bout all I can think of though.