Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Happ UGCI Wires  (Read 1081 times)

0 Members and 1 Guest are viewing this topic.

beatter

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 19, 2012, 12:47:48 pm
  • Professional Noob
    • Jaswin
Happ UGCI Wires
« on: July 15, 2011, 01:52:24 pm »
I recently got a cabinet that came with a Happ Fighting UGCI, but didn't have the complete wiring harness and I want to add some more buttons. I'm wondering if anyone knows where I can buy new connectors to add my own wires?

The connectors are the kind that you see on motherboard fan connectors (the 3 or 4 pin ones). I don't know if there is a specific name for them or not.

If you know where to find them thanks, or if you know of an easy alternative thanks! :D
My MAME Cabinet - Very First...Ever!

beatter

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 19, 2012, 12:47:48 pm
  • Professional Noob
    • Jaswin
Re: Happ UGCI Wires
« Reply #1 on: August 01, 2011, 08:11:08 pm »
For anyone who may be looking for these, I found some good substitutes.

Pololu has some housings and some pre-crimped wires that will fit the UGCI headers.

I bought some 36" rainbow female-female wires and cut them in half, they worked great for my setup.
My MAME Cabinet - Very First...Ever!