I'm working on a Primal Rage cab with a Neotec 2515c monitor. It worked pretty well the last time I had it powered up, but that was about 5 years ago, and I'm thinking it'd be a good idea to do some preventative maintenance as long as I've got the cab opened up anyway. I understand the flyback on these monitors tends to go over time, so I'm planning to replace that and install a cap kit. Here's the problem: this doesn't seem to be one of the standard cap kits anyone carries, and I don't know enough about these things to make any sense of the schematics in the service manual. Can someone who understands these things take a look it and help me figure out which capacitors I'll need to replace?
Additionally, if anyone who's familiar with this model knows anything else I should be doing beyond the cap kit and flyback, I'd rather hear about it now than get this thing hooked up and have to pull it out again. Like I said, there was nothing wrong with it the last time I used it, but it's 17 years old at this point, it hasn't been turned on in 5 years, and this is a convenient opportunity to do whatever needs to be done to refurb the thing. Thanks!