Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: How auto start and shut down  (Read 2370 times)

0 Members and 1 Guest are viewing this topic.

Ryan

  • Guest
  • Trade Count: (0)
How auto start and shut down
« on: July 14, 2002, 04:09:32 am »
Been using Mame32 for quite a long time and researched thoroughly on building my cabinet, but don't know exactly how I am going to set up the automatic start and do i have to add additional buttons just for a shutdown.

Do I really need a Front End for autostart? I thought Mame 32 was a front end for Mame.  Any tips, hints, or suggestions will really help on start and shut down, and if a Front End is really necessary.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

twist

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 46
  • Last login:December 06, 2002, 04:03:20 pm
Re: How auto start and shut down
« Reply #1 on: July 14, 2002, 06:52:19 am »
1. Mame32 is not a frontend for Mame. There are 2 versions of MAME --

MAME DOS (dmame)
MAME32 (mame for Windows DOS)

2. You need a frontend if you don't want to have to constantly type mame command lines. You need at least a BATch menu as a frontend.

« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »