Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: ROWE AMI R-83 disco- no sound problem  (Read 2828 times)

0 Members and 1 Guest are viewing this topic.

eugeneclark5

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:August 30, 2012, 11:37:34 pm
ROWE AMI R-83 disco- no sound problem
« on: June 06, 2011, 10:46:35 am »
Have and AMI r83 that has worked well over the last 2 years, but now is not producing any sound.  I replaced the 4 fuses behind the amp, looked for loose connections, but did notice that one of the 4 red light indicators is not lit.  I also had a remote volume switch connected, but don't know if that could have effected the system.
Logged

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: ROWE AMI R-83 disco- no sound problem
« Reply #1 on: June 07, 2011, 08:09:01 am »
Hi Eugene,

What country do you live in?
The amp in the R-83 should be the 125 watt 6-07438-02. The volume control plug does have to be in correct way round.

I assume that the red led you are talking about is on the power supply in front of the amplifier compartment.

Regards
Alan Hood
ami-man
UK
Logged

eugeneclark5

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:August 30, 2012, 11:37:34 pm
Re: ROWE AMI R-83 disco- no sound problem
« Reply #2 on: June 10, 2011, 02:44:46 am »
Hi Alan,
Live in the US.  Haven't had a chance to check on the connections again, other than to verify that the 28vdc light is not on. the other 3 light indicators are on. 

Thanks for your help.
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:July 20, 2025, 04:01:19 pm
  • I break stuff...then fix it...sometimes
Re: ROWE AMI R-83 disco- no sound problem
« Reply #3 on: June 11, 2011, 01:20:28 am »
Quote
no sound problem

no problem!  :cheers: no sound problem!

Quote
the 28vdc light is not on

i would check the f1001 (3amp) on the power supply and if it's good, the associated circuit for the 28vdc (bridge rectifier, resistors, diodes etc.)
Logged

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: ROWE AMI R-83 disco- no sound problem
« Reply #4 on: June 21, 2011, 04:54:00 pm »
Just popping in to say "Hi" to a fellow AMI Disco owner.   :cheers:
(mines not all original, but still love it)
Logged
Not a technician . . . . just a DIY'er.
Pages: [1]
  
Go Up
« previous next »