Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Solved:Need wiring help with TB3  (Read 1048 times)

0 Members and 1 Guest are viewing this topic.

UncleMame

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:June 10, 2011, 08:47:29 pm
Solved:Need wiring help with TB3
« on: May 17, 2011, 12:28:09 pm »
Does anyone have a link or document to install the TB3 Groovy Gamegear Trackball (wiring/installation) ?

Thanks
« Last Edit: May 22, 2011, 09:34:04 am by UncleMame »
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Need wiring help with TB3
« Reply #1 on: May 17, 2011, 12:36:13 pm »
Did you get the opti wiz with it for an interface? 
Logged

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7014
  • Last login:July 31, 2025, 01:58:29 pm
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: Need wiring help with TB3
« Reply #2 on: May 17, 2011, 01:07:08 pm »

The Groovy-TB 3" Trackball has three wire pairs, each with .100" spaced connectors.  They are as follows.

Red and Black - +5vDC and GROUND respectively.
Blue and Purple - Y-Axis
Yellow and Green - X Axis

The orientation of the axis connection will vary, based on the encoder wheels ordered.  If either axis is reversed, just unplug that wire pair from the Opti-Wiz, turn it 180 degrees, and re-connect.
Logged
Pages: [1]
  
Go Up
« previous next »