Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Trim Router for Joystick Recession?  (Read 997 times)

0 Members and 1 Guest are viewing this topic.

JBBOPT

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:August 07, 2011, 10:18:20 am
Trim Router for Joystick Recession?
« on: May 03, 2011, 12:55:19 pm »
I'm looking to buy a trim router from harbor freight
http://www.harborfreight.com/catalogsearch/result?q=trim+router

if i use the joystick hole as a a starting point will i be able to route a joystick recession about 1/4 to 2/5 deep into 3/4 inch plywood / mdf? Thanks
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Trim Router for Joystick Recession?
« Reply #1 on: May 03, 2011, 01:29:26 pm »
Should work since it has adjustable cutting depth.   You would have to make sure those guide tabs are removable to allow the base to sit flat.
Logged

JBBOPT

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:August 07, 2011, 10:18:20 am
Re: Trim Router for Joystick Recession?
« Reply #2 on: May 03, 2011, 01:38:29 pm »
It looks like it is. Thanks for the reply. Will have to get a router bit for it what would work best?
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Trim Router for Joystick Recession?
« Reply #3 on: May 03, 2011, 02:43:13 pm »
Any straight cutting bit will work if you drill the hole for the joystick first and work out from it.   
Logged
Pages: [1]
  
Go Up
« previous next »