Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Video/USB switch  (Read 837 times)

0 Members and 1 Guest are viewing this topic.

ShadowSoldier89

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:July 15, 2013, 02:43:43 pm
Video/USB switch
« on: April 20, 2011, 01:07:41 pm »
So i'm currently working on a cabinet with a PS3 and a PC installed on it for Mame/modern fighters (Blazblue and the new Mortal Kombat, stuff not available on PC) and I'm using Chimp SMD PCBs to hook up the controls, I've tested them on both PC and PS3 already

What I'm wondering is what kind of switch will work for swapping the video between the PS3 and PC, I've used plenty of KVMs that were old VGA PS/2 but I'm not sure if modern KVMs with USB will pass a non keyboard/Mouse signal through them

Anyone have any recommendations? Needs to also be either HDMI or DVI

bobotech

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 70
  • Last login:November 29, 2015, 10:13:32 pm
Re: Video/USB switch
« Reply #1 on: April 21, 2011, 04:15:46 pm »