Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Has anyone made a MVS-based Neo Geo bartop?  (Read 1619 times)

0 Members and 1 Guest are viewing this topic.

litwack

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:May 27, 2011, 03:12:00 pm
Has anyone made a MVS-based Neo Geo bartop?
« on: April 03, 2011, 06:07:22 pm »
This is my first post, so please be gentle. I've Googled around and seen a few Neo Geo themed bartops with computers inside, but has anyone built one with a 1-slot MVS inside? I'm fuzzy on all the wiring and stuff that would have to be done, what power supply, etc. I realized I could probably stick a prebuilt "consolized" MVS unit inside a Northcoast bartop unit but that almost seems like cheating.

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Has anyone made a MVS-based Neo Geo bartop?
« Reply #1 on: April 04, 2011, 12:36:35 am »
This is the smallest MVS 1 slot that I have seen.  You will probably have to use Google to translate from Spanish to English for the details.  Pics are good without translation.

MVS Bartop Spanish

« Last Edit: April 04, 2011, 12:39:32 am by BobA »

litwack

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:May 27, 2011, 03:12:00 pm
Re: Has anyone made a MVS-based Neo Geo bartop?
« Reply #2 on: April 04, 2011, 11:27:52 am »
BobA, that is really helpful, thank you. That's a really small unit!

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Has anyone made a MVS-based Neo Geo bartop?
« Reply #3 on: April 06, 2011, 08:16:27 am »
Not a bartop but a mini.  Might give you some construction ideas.  If the bottom was cut off it would be a bartop.

Mini MVS Thread

Here is a bartop but it uses a PC not an MVS board.

PC Based
« Last Edit: April 06, 2011, 03:33:00 pm by BobA »