Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Pre-Drilled Control Panels  (Read 1936 times)

0 Members and 1 Guest are viewing this topic.

twitami

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 108
  • Last login:December 22, 2016, 01:09:08 pm
  • I want to Build My Own Arcade Controls!!
Pre-Drilled Control Panels
« on: January 09, 2011, 05:06:52 pm »
I have a rather unique Quasicade Cocktail cabinet that I have made into a MAME unit. I want to have more than one control panel to use with it, but I have no equipment (or room) to make CPs myself. Is there anyone left that makes CPs (blank or drilled) anymore? Something like these:

http://www.arcadecab.com/Store/Controllers.htm

The problem is that it is a one player machine, so the CP can only be about 15" wide or so.

Thanks!

jipp

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 282
  • Last login:April 01, 2016, 07:29:49 pm
Re: Pre-Drilled Control Panels
« Reply #1 on: January 09, 2011, 08:07:18 pm »
i was gonna list off mameroom.com etc..  then i saw you said one player and the width.. your best bet would be hit up ebay. they have sellers that will do what you wish.. look at the feed back.. heck most of them have a webpage if you rather deal out side of ebay. good luck.

chris.

WhereEaglesDare

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1536
  • Last login:March 24, 2014, 08:47:08 pm
  • Shut Off All The Compactors on the Detention Level
    • My HomePage
Re: Pre-Drilled Control Panels
« Reply #2 on: January 09, 2011, 08:16:56 pm »
If you post pics of what you got and what you want im sure someone here will cut you one for a decent price, just keep in mind that shipping will be outrageous.