Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Mini-PAC refuse to get rom written.  (Read 1442 times)

0 Members and 1 Guest are viewing this topic.

speeder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 15, 2011, 06:46:56 pm
Mini-PAC refuse to get rom written.
« on: December 11, 2010, 02:33:42 pm »
I am trying to program a minipac, but it is not working, the WinPAC software says just that it failed.

Someone has a clue on that?

But other than that, it is working fine (even mouse buttons and all that I added to it, and the trackball).
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Mini-PAC refuse to get rom written.
« Reply #1 on: December 11, 2010, 04:19:53 pm »
Depends on which version you have.   On the older version there is a Alt~ROM Jumper Block that needs to be moved to allow it to be programmed.   Not sure about the newer model.
Logged

speeder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 15, 2011, 06:46:56 pm
Re: Mini-PAC refuse to get rom written.
« Reply #2 on: December 11, 2010, 05:46:44 pm »
I tried to use the old version WinIPAC thing, and it failed.
But after that, the new version worked fine... :/

I wonder what changed when I tried to use the older version.
Logged

NoBullMAME

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Last login:April 11, 2011, 11:23:34 am
  • Author, The No Bull MAME Guide
    • No Bull MAME Guide Blog
Re: Mini-PAC refuse to get rom written.
« Reply #3 on: December 29, 2010, 01:31:02 pm »
Quote from: speeder on December 11, 2010, 05:46:44 pm
I tried to use the old version WinIPAC thing, and it failed.
But after that, the new version worked fine... :/

I wonder what changed when I tried to use the older version.

If you have a new version of the mini-pac (with one mini-usb connection, not two PS/2 ports) some of the older versions will not program it (at least with mini-pac selected under options).

But is sounds like you are now working, so it may be a moot point (except for anyone searching the forums with a similar problem).
Logged
Author,The No Bull MAME Guide Intro priced at: $2.99
Pages: [1]
  
Go Up
« previous next »