Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: TurboTwist 2 Wiring?  (Read 1048 times)

0 Members and 1 Guest are viewing this topic.

mrbones

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 78
  • Last login:September 19, 2024, 12:25:11 pm
    • ATVFlorida.com
TurboTwist 2 Wiring?
« on: September 02, 2010, 04:40:58 pm »
I was redoing my CP and cut the wires to my TurboTwist 2. When I went to redo it I noticed the wire colors are different when hooking it up to my mini-pac. I basically need to know which color wires are for the power? I can figure out the rest.

There's green, white, brown and yellow wires.

I found this doc, http://www.groovygamegear.com/PDF/TT2DOCSNEW.pdf, but it does not refer to any brown or white wires.

mrbones

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 78
  • Last login:September 19, 2024, 12:25:11 pm
    • ATVFlorida.com
Re: TurboTwist 2 Wiring?
« Reply #1 on: September 02, 2010, 08:46:44 pm »
Hey, maybe I do have 1/2 a brain. I found a piece of paper that I wrote down the wiring before I cut the wires. The problem was, I then forgot I wrote it down. Jeez.

Brown - Red
Green - Blue
White - Black
Yellow - Purple