Author Topic: Trying to build new dynamo CP (Read 1944 times)

Mikezilla · « **on:** July 13, 2010, 05:59:16 pm »

My old CP on my dynamo cab is busted up, warped, and pretty much broken. Any ideas on how to create a wooden one (cause metal would be too hard) or is that not possible on a dynamo cab? I have only seen metal ones on the same type that I have, so Im not even sure if its possible. If it is, could someone let me know where to get plans/started?! Thanks!

BobA · « **Reply #1 on:** July 14, 2010, 08:58:52 am »

Here is a thread where the metal cut corner CP was replaced with a wooden one

Link

Mikezilla · « **Reply #2 on:** July 14, 2010, 02:48:13 pm »

Cool thanks so much!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Trying to build new dynamo CP (Read 1944 times)

Mikezilla

Trying to build new dynamo CP

BobA

Re: Trying to build new dynamo CP

Mikezilla

Re: Trying to build new dynamo CP