Author Topic: Speakers (Read 1354 times)

Darren01274 · « **on:** July 12, 2010, 06:21:42 pm »

From Jamma connector wires do you connect the two wires to the two connectors on the arcade speaker?. I am still getting buzzing changed speaker for new one and also changed to AT Power supply.

Bender · « **Reply #1 on:** July 12, 2010, 06:29:23 pm »

how bad is the buzz?
These boards have notoriously crappy sound

CheffoJeffo · « **Reply #2 on:** July 12, 2010, 07:36:10 pm »

Try disconnecting your coin door and marquee lights.

Is there a ground wire attached to the frame of the speaker.

Darren01274 · « **Reply #3 on:** July 13, 2010, 01:45:53 am »

Hi there is no problems when using PC speakers through the Line Out sounds fine. When I use Arcade Speaker with Jamma wires I get a bad hum/buzz with game sounds. I tried connecting ground wire to metal of speaker no joy really. Am I wiring it up right? 2 wires to two of the solder points on speaker.

BobA · « **Reply #4 on:** July 13, 2010, 03:19:23 pm »

That is the only way to wire a single speaker.

Bender · « **Reply #5 on:** July 13, 2010, 10:46:47 pm »

hey, have you tried a different speaker, maybe it's the speaker and NOT the jamma board?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Speakers (Read 1354 times)

Darren01274

Speakers

Bender

Re: Speakers

CheffoJeffo

Re: Speakers

Darren01274

Re: Speakers

BobA

Re: Speakers

Bender

Re: Speakers