Jamma 60 in 1 speakers question

[Darren01274]

Hi what type of speakers can be used with the 60 in 1 jamma board can original arcade speakers be used? and how do you control the volume.

[BobA]

There is a volume adjust page in the service menu.   You can use a regular arcade speaker.

[Darren01274]

Thanks. Stero or Mono Speakers.

[BobA]

Most jamma are mono.

[Bender]

there is a pot on the board that also controls the volume of regular speaker hook up
and a second option is to use powered speakers through the 1/8" jack that have there own volume control cause the board doesn't control the through the line out jack
also you need 12V hooked to the board to use the regular speakers hook ups (not the line out)

[Darren01274]

How do you wire an arcade switchable PSU to jamma 60 in 1 so I could use arcade speaker

[BobA]

If your power supply is wired to the jamma connector then the 60 in 1 will receive 5v AND 12v from the connector.   If it is not wired to the jamma connector then you can wire a 4 pin drive connector to the Arcade PS for 5V red 12V yellow and Ground black (2)

[RayB]

He can also use a PC power supply.