Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: How do I remove the coin door?  (Read 955 times)

0 Members and 1 Guest are viewing this topic.

kingfish

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:July 23, 2010, 04:09:39 pm
How do I remove the coin door?
« on: April 08, 2010, 08:06:55 pm »
I need to paint the front of a cabinet and need to remove the entire coin door.  Is there a way to do it?  It appears that a rivet is holding the frame of the door on.  Its a galaxian, by the way.  Thanks.
Logged

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7784
  • Last login:July 14, 2025, 12:11:49 pm
  • Worthless button pusher!
Re: How do I remove the coin door?
« Reply #1 on: April 08, 2010, 08:23:42 pm »
Open the door and look inside the cabinet -- there should be nuts on the inside of the cab.
Logged
Working: Not Enough
Projects: Too Many
Progress: None

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: How do I remove the coin door?
« Reply #2 on: April 08, 2010, 09:41:53 pm »
There are a total of 4 bolts that are spot welded to the outer frame. On the inside of the cabinet with the cpontrol panel removed, look down inside at the back of the coin door frame and you'll the holes where the recessed nuts are holding the door frame. An 11/32" nutdriver will remove the nuts anf the door will come off.
Logged
Pages: [1]
  
Go Up
« previous next »