Author Topic: FS: 29" VGA arcade monitor [US/WV/Charleston] (Read 5663 times)

Wade · « **on:** March 21, 2010, 11:17:59 pm »

I'll probably be parting out a game soon that has a very nice 29" VGA (possibly multisync) monitor. I live in WV, 25314.

Make offers.

Thanks,
Wade

Wade · « **Reply #1 on:** March 22, 2010, 09:13:47 pm »

Bump with a Pic.

Wade

Wade · « **Reply #2 on:** March 25, 2010, 10:19:46 am »

I will get more pics with the test pattern and such. The monitor's picture is excellent, it looks absolutely awesome. Where was a deal like this when I paid $500 for my D9200 27"? This is perfect for a MAME cabinet.

I will find out if it is multisync in the next week or two.

Thanks,
Wade

daywane · « **Reply #3 on:** March 25, 2010, 08:53:50 pm »

7 hr round trip for me. to bad. not that I mind road trips. but the time, gas and cost of monitor I could buy a nice PC monitor at wal-mart

Wade · « **Reply #4 on:** March 25, 2010, 09:36:03 pm »

Quote from: daywane on March 25, 2010, 08:53:50 pm

7 hr round trip for me. to bad. not that I mind road trips. but the time, gas and cost of monitor I could buy a nice PC monitor at wal-mart

A nice PC monitor at Wal-mart doesn't compare to a real arcade monitor!

Where are you exactly? I have some trips planned this summer, might be passing closer to your way.

Wade

daywane · « **Reply #5 on:** March 26, 2010, 08:47:53 pm »

frankfort KY

Wade · « **Reply #6 on:** March 30, 2010, 07:33:33 am »

I'm not planning to be in that area in the near future.

Wade

Wade · « **Reply #7 on:** April 17, 2010, 11:42:17 pm »

The monitor is a VGA only, Sanwa 29" 29E31S model. The picture is incredible!

Thanks,
Wade

Franco B · « **Reply #8 on:** April 18, 2010, 09:30:46 am »

They are nice monitors

31k only though, they are not multi-sync.

Wade · « **Reply #9 on:** April 28, 2010, 01:37:39 pm »

Bump! This is a GREAT monitor for $300.

Wade

Wade · « **Reply #10 on:** May 04, 2010, 04:54:48 pm »

Where have all the MAME builders gone?

Wade

Wade · « **Reply #11 on:** May 19, 2010, 09:42:52 am »

Bumping again.

Wade

Wade · « **Reply #12 on:** June 03, 2010, 12:21:58 pm »

Bumping.

Wade

Wade · « **Reply #13 on:** July 30, 2010, 04:55:44 pm »

Bump, I'm willing to crate and ship this.

Wade

Franco B · « **Reply #14 on:** July 31, 2010, 09:48:56 am »

Come on guys, people always seem to be looking for a large 4:3 CRTs and these are lovely.

They have a VGA port so you can plug your PC, 360, Dreamcast (via VGA box) etc straight in and hassle free

highholyme · « **Reply #15 on:** August 02, 2010, 10:45:32 am »

I have some cash soon, so you have my attention.
How much would it cost to ship to to Ohio?

Wade · « **Reply #16 on:** August 02, 2010, 12:50:38 pm »

Quote from: highholyme on August 02, 2010, 10:45:32 am

I have some cash soon, so you have my attention.
How much would it cost to ship to to Ohio?

I'd figure shipping would probably run about $150 or so.

Where are you in OH? I might be in OH in the nearish future.

Thanks,
Wade

highholyme · « **Reply #17 on:** August 03, 2010, 10:27:38 am »

Xenia Ohio, Nearest Metro Area would be Dayton.
I can go as far as Cincinnati however if it will save some cash!

How much did you want for the monitor? And also, am I crazy or did I hear someone say that it has a VGA hookup?

Wade · « **Reply #18 on:** August 03, 2010, 10:40:26 am »

I'm in the other direction, southeast. I could come up 35 and meet you at Jackson or Chillicothe. I'd rather do that than ship it and risk damage. I'm asking $300 for it.

Yes, it has a VGA port as well as molex style connectors used in later Sega games. It is 31khz VGA which will limit your resolution to 640x480. However, most PC VGA cards will go that low without any problem. This makes for a really painless MAME setup. Or like Franco said, this opens up the option to connect to some other devices like Dreamcast, Xbox, etc.

Wade

highholyme · « **Reply #19 on:** August 04, 2010, 09:24:52 am »

I don't mind the 640x480, thats how I had my mame set up already.

I can do the meeting up, thats fine. When will you be in this direction?

Jasonmm · « **Reply #20 on:** August 04, 2010, 09:34:37 am »

Is Michigan in your travels ?

J

Wade · « **Reply #21 on:** August 29, 2010, 10:38:56 pm »

I won't be in Michigan anytime soon.

This monitor is still available!

Wade

Wade · « **Reply #22 on:** September 12, 2010, 10:18:59 pm »

Any interest? I can ship this for about $100. Make an offer on the monitor!

Wade

Gray_Area · « **Reply #23 on:** September 14, 2010, 08:20:41 pm »

Fedex might ship it for a bit less.

Wade · « **Reply #24 on:** September 14, 2010, 08:55:58 pm »

That's where the quote's from.

This looks like it's sold anyway.

Thanks,
Wade

Wade · « **Reply #25 on:** October 05, 2010, 09:15:40 pm »

Not sold after all!!

Wade

amendonz · « **Reply #26 on:** October 06, 2010, 12:55:26 am »

Arg dam I wish I was in the states, that is exactly what I need. Perfect for a 360 cab.

childsremix · « **Reply #27 on:** October 06, 2010, 05:42:29 pm »

Is the monitor curved or flat? How much is shipping to CA 95687?

Wade · « **Reply #28 on:** October 06, 2010, 08:15:14 pm »

Quote from: childsremix on October 06, 2010, 05:42:29 pm

Is the monitor curved or flat? How much is shipping to CA 95687?

$112 to that zipcode. It is a flat style CRT tube... meaning it's flatter than an older style monitor, but not perfectly flat like an LCD. It still looks like a CRT but it doesn't have much bulge to it, and the tube itself is pretty rectangular.

Wade

Pinball Wizard · « **Reply #29 on:** October 06, 2010, 09:37:57 pm »

Wade, I want to congratulate you on being so on top of getting info. You always reply back to people so quickly, with good information!

Wade · « **Reply #30 on:** October 07, 2010, 09:17:33 pm »

Thanks. Not sure if we have dealt before but I appreciate the comments.

Attaching some pics to show the relative curve/flatness of the tube.

Wade


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news