Hi All:
In my quest entitled "sell everything I love dearly to pay for open heart surgery" I have decided to see if there would be any takers on everything pin/vid related I own.
If I am to take this like a man, I want to sell all of them, because it will be as painful to just sell my favs, but I say "up to" because you might not want all of them. You may rather me dispose of a couple of the cabs than store them. However, I will sell individual titles (prices listed)...everything is OBO but please make any offers reasonable. I am open to offers on partial lot as well. I know these aren't fire-sale prices, but I NEED money desperately. As a lot these are only $200 a game and although a few titles are clearly not worth that much, some are clearly worth much more. This is painful to do, but I am desperate.
Many of these are project/untested machines, many have all new parts to make them nice. Some of the vid cabs were destined for mame machines, and I can/will include some good computers and parts and such to do so if you buy the lot.
There are 11 Pins, and 19 Vids/cabs, and piles and piles of parts, extras, etc. I will give a rundown of titles and highlights of conditions.
Feel free to call me with any questions.
Justin
(281) 850-9086
Pins:
Williams Hyperball ($700)
Good condition, fresh full rebuild of every board except sound. New plastics, balls, and ball shooter, all noise mods and shooter mod done, custom HS saving rom and custom keychain. Bg is 8/10, is currently disassembled for cab paint touchup and new coin door (nice but not perfect coin door included). Good painted legs. Can reassemble before sale.
Bally Future Spa ($400)
Good condition but fully disassembled for PF restore. MPU is nasty (repaired) but works, fresh rebuild on SDU and rectifier, sound board untested. cab is faded/flaking, good painted legs, BG has 2 small cracks (have not yet triple thicked) PF has minimal paint loss around sunken inserts. most metal parts on top of PF were corroded, have bought about 60% of PF parts brand new (posts, springs, screws, flippers, rubbers, ball, etc.)
GamePlan Attila The Hun($500)
Great condition, rare game (prod. 500) MPU freshly rebuilt. New legs, rubbers, springs, ball. Spare SDU. Spare NOS plastic set. New drop target inserts (originals are worn). BG is 8/10, starting to flake/lift on the edges, needs TT. Cab is 9/10, PF has minimal paint loss around a couple inserts.
Bally Space Invaders($300)
Complete but untested, assume not working. NOS spinner, new rubbers, custom flipper decals. BG's are pristine, cab is fair, PF has significant midsection paint loss as so many of them do.
Williams Time Warp($250)
Complete but untested, assume not working. Cab is in fair to rough condition, BG art is spiderweb cracked pretty bad. PF is dirty as hell but minimal paint loss (IIRC). Has orig. banana flippers. Spare bumper caps, rectifier board. new rubbers, new PF glass. Includes Leons Sys6 test ROM, since I assume it will need it.
Gottlieb Rock($300)
Complete but untested, assume not working. Cab is in pretty good condition, Translite faded pretty badly, PF is dirty with lifting mylar but no actual damage IIRC, I believe some of the posts and such need tumbling work. Plastics were trashed, but I have a perfect NOS set. New rubbers included. I think the legs were rough.
Bally Baby Pac-Man($400)
I'll call this one a pin. Complete but unsure of working condition. Bought with no MPU, power up would come up with a rolling screen. Vidiot flashes correctly, but rolling is either caused by monitor adjustment or vidiot. Bought a new MPU but haven't installed. PF has minimal paint loss, Good condition bezel bought and haven't even unwrapped. Marquee is good, side art is mostly intact, cab is somewhat rough (swollen bottom)...Control Panel is disassembled, comes with new CPO, spinner decals, t-molding, rubbers, and ball.
Fascination Inc. (ALI) Circa 1933($150)
Complete Coktail Pinball, but non-functional MPU. John Robertson can fix it, but it seems no one else can. PF is nice, cab is pretty good, plastics/apron are busted to hell.
ALI Eros One($250)
Complete Coktail Pinball, but (again) non-functional MPU. Same system and setup as Circa 1933. Everything in overall good shape. For either of these 2 machines (this one if bought separately) I have an additional (untested) MPU and wiring harness that may bring one to life. You can unplug and swap the PFs so I had intended on one good machine that I could switch PF back and forth.
Dedicated Vids:
Sega Star Wars Arcade Racer($1000)
Good condition 50" Deluxe Cockpit model. Minor bumps, scrapes and bruises, moderate screen burn. One side of side art is rough. Needs a little TLC and minor parts (grommets, screws, etc.)
Sega OutRun($400)
Good condition. Recent capkit on the monitor, metal map is mostly intact. CP has very minor damages. Side art has some scratches but is pretty good condtion. Cab is in overall good condition but needs repair on one side of the floor platform. Includes replacement steering wheel (installed one has a chunk gouged out), New uninstalled horn emblem, new floor mat. New (not installed) t-molding, spare shifter.
Atari Star Wars Upright($500)
Fair to good condition; complete but not fully tested. WG monitor powered up and no deflection led lit. PCBs are untested because it had a bad ARII when I bought it; I bought a newly rebuilt one after it went into storage. I am sure it needs a new big blue. Cab is rough around the edges, but side art is in overall good condition (red is faded of course). CP is nice, bezel is nice, paint on yoke is worn and probably needs new springs. Marquee is trashed (glass is shattered) but held together with tape and included.
Namco Cyber Sled($500)
Good condition;both monitors recently rebuilt but need color matching. Cab is in overall good condition, a little rough on the bottom edge of monitor section, IIRC the decals on the seats were a little rough. Missing a few stickers on one of the control panels. Analog joysticks (same as on Star Wars Trilogy) would not calibrate properly, so I bought 8 extra complete joysticks (machine uses 4) and the adjustment pots for the pot amp pcbs in case that was the problem. Never got a chance to finish checking. Marquee has a minor crack and includes new (not installed) t-molding. Spare set of PCBs (both sides) that worked but wouldn't network link. So I bought a whole new (installed) set.
Bally Super Pac-Man($200)
Mostly complete and mostly functional; cab needs a fair amount of woodwork/TLC and a monitor bezel. G07 Monitor needs chassis repair, all else tested good. Marquee is good, coin door is rough. Resto not started, but includes new: NOS CPO, repro CPO, buttons, new t-molding, replacement control panel (current one is bent) with a decent original CPO on it.
Namco Aqua Jet($350)
Fair to good conditon 50" Deluxe jet ski game. Needs new 50" S-video capable TV or current one repaired. Cab (monitor case) is in fairly rough condition, 1 side of the side art is destroyed. PCBs are tested and work, air compressor is fresly rebuilt. needs an air hose fitting so pneumatic cylinders are not tested but was told all worked but the TV when bought. Needs a thorough cleaning and monitor plexi buffed.
Konami Boxing Mania($350)
Rare imported Japanese only cab, but easy enough to play. Cross DDR with physically beating the hell out of a machine and you got it down. Cab is in decent condition, a little rough on the bottom and cracks in the plexi, idiot safety pads are torn up but should be removed anyway. Missing the original and totally unnecessary floor mat. 25" Monitor is nice and bright, Motion sensors have been cleaned and work. Side punching pads and motors all good. Top (face) pad and motor are missing but does not significantly affect gameplay. Bottom "beating pad" works but needs adjustment.
Non-Dedicated Cabs That Could be Vids:
Sega Megalo 410 JAMMA Candy Cab($450)
Good physical condition, setup up for dual 6 button layout. Fully functional, but monitor is dim as hell and needs work. I bought (and will include) qty2 40" SVGA VGA/DVI LCD rear-projection videowall cubes that have an 8000hr bulb life to replace the aged CRT unit (and have a spare) to make it a mame machine. The cubes should be a drop in replacement and use the existing mirror/screen.
Nintendo DualSystem VS UR Cab($250)
Decent physical condition, needs woodwork on one side edge. Converted to Super High Impact Football, which works, but 1 EZ20 monitor is not running. I have not investigated to see if this is due to poor jerry-rigging from the previous owner (SHI is a single monitor game) or if the monitor has issue. The running EZ20 probably needs a cap kit.
Sega Rally Cockpit($250)
Decent physical condition, was one half of the twin unit but includes the coin box portion with a trashed coin door. Needs a good cleaning. Missing the (29")? monitor and PCBs, and possibly the back door. All other controls/motors/pedals/etc. are present. Was planning on turning this into an xbox multigame racer, Will include the Fanatec Speedster racing wheel (best high end force feedback racing wheel ever made, retailed $150 by itself)
Final Lap Twin Cockpit($300)
Fair physical condition, needs some woodwork at the base by the seats section. Needs a good cleaning. Had been converted to 1000 Mile Rally and still shows as such. Missing the monitors and PCBs. All other (converted) controls/pedals/etc. are present. Was planning on turning this into a dual xbox multigame racer, Will include TWO Fanatec Speedster racing wheels (best high end force feedback racing wheel ever made, retailed $150 each by themselves), 2 brand new HAPP up/down turbo shifters, and the large Player 1-Player 2 Cruisin' marquees.
Mame-Destined Cabs:
Bally Gorf Cabinet
I debated on whether I would convert this back. It's been painted over (mostly stripped off now) and all bezels, plexi, and marquee are decent to good. Got a rough complete original control panel and what's left of the converted one, all that is left of the innards, however, is the rank light pcb. Have and can include everything to make this a nice complete mame machine, including 21" UXGA monitor. Nobody will pay anything worthwhile for whats left of this separately, so it's not listed as such.
Stern Cocktail Table
Wood is in good conditon, glass is scratched and painted nasty, CPs are also nasty but populated. Wiring is intact IIRC but for what game who knows? Like above, was going to make this a mame machine and have everything to complete it as such, but worth very little on it's own.
Sega/Gremlin Cab
Wood is in good conditon,but was already on it's way to becoming a mame cab. already mounted with a UXGA monitor, 2 control panels to work with. Same as above.
29" Ready Bare MDF Cab
Self explanitary, needs Control Panel. Just started. Speakers and wheels mounted.
...and a massive pile of parts. Half a dozen good computers, monitors, tubes, chassis', pcbs, io boards, pedals, joysticks, buttons, encoders, wheels, levelers, marquee lights, trackballs, SDUs, Fuses, connectors, harnesses, plugs, switches, etc. YOu nam it.
...and a BK 470 CRT rejuvenator that I haven't had a chance to resolder, but will work when done.
Home
Help
Search
Login
Register
Send this topic
Print
Topic: FS: [HOU, TX] 9 pins, 14 vids/cabs $4K (Read 2553 times)
