Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Quick question about I-PAC/J-PAC  (Read 859 times)

0 Members and 1 Guest are viewing this topic.

no_chocobo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:March 27, 2010, 07:32:26 pm
Quick question about I-PAC/J-PAC
« on: February 25, 2010, 04:02:16 pm »
I'm converting an old jamma cabinet to MAME. I've read everywhere that using an ArcadeVGA card with a J-PAC is they way to go.

I was wondering though, since I'm completely scrapping the current control panel & buttons/wiring, would it be easier just to use an I-PAC? I'm going for a standard capcom-like panel layout. Using an ArcadeVGA, the J-PAC's 15hz detection thing is redundant and not totally necessary, right?

The price for an I-PAC, ArcadeVGA, and breakout cable is less than the ArcadeVGA and a J-PAC.

Which would you reccomend?

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Quick question about I-PAC/J-PAC
« Reply #1 on: February 26, 2010, 04:24:12 pm »

The J-PAC will not save any wiring time if you dont have JAMMA wiring in the cabinet and so an I-PAC will be OK. But the J-PAC also has a video amplifier. Some monitors need this, but we do sell a separate video amplifier which is an alternative to the one built into the J-PAC.

Andy

no_chocobo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:March 27, 2010, 07:32:26 pm
Re: Quick question about I-PAC/J-PAC
« Reply #2 on: February 27, 2010, 01:09:44 am »
There is JAMMA harness/wiring right now, but it is all soldered to the old control panel, I think it might be more work to save the JAMMA stuff. How do you tell if you would need a video amplifier? I know it has some sort of WG monitor.