Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: foolhand's thread  (Read 2953 times)

0 Members and 1 Guest are viewing this topic.

foolhand

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 18, 2011, 09:18:10 am
foolhand's thread
« on: January 30, 2010, 12:49:07 pm »
Hey guys, lurker and arcade enthusiast here.

I could use some advice on creating a CPO for my mameroom 2 player classic controller (7 button). My goal is to have my buttons grouped per stick/spinner/trackball and to have labels under/above each button (a,b,c,d,x,y,z).

Accuracy is an important factor when the CPO would be applied, and would like to know where the best place to start would be. I've been in contact with Scott from mameroom to see if I could get a full size template of the panel, which would make my life a lot easier. Also I have tried contacting the guys at mamemarquees (where I'm planning on getting it printed) for the same request.

Is there anyone out there with a template of this panel that is willing to share? Or is it time to get out the measuring tape?

Thanks,
foolhand
« Last Edit: March 03, 2010, 06:35:30 pm by foolhand »

foolhand

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 18, 2011, 09:18:10 am
Re: New to CPO's
« Reply #1 on: January 31, 2010, 12:33:23 pm »
Found one I can hijack  ;D

Thanks for the views, at least you guys read the post.


foolhand

foolhand

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 18, 2011, 09:18:10 am
Re: New to CPO's
« Reply #2 on: January 31, 2010, 03:56:13 pm »
OK, so here is the bare full size template of mameroom's 2 player 7 button control pad, if anyone out there was in the same situation as me.
Thanks to the one who uploaded his full CPO, if you know who you are, give yourself a pat on the back from me.

Saved as jpg.

foolhand

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 18, 2011, 09:18:10 am
Re: New to CPO's
« Reply #3 on: February 12, 2010, 07:24:13 pm »
Well this is what I've been working on. It's all cut and paste, but it sure works good  :D
I'm still on the fence about adding transparent button surrounds and more text.
Planning on getting it printed on non adhesive vinyl and sandwich it with a piece of plexi, so if I ever wanna change it up.
Tell me what you guys think.


Cozmo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:November 20, 2013, 09:45:28 pm
Re: New to CPO's
« Reply #4 on: February 12, 2010, 11:34:15 pm »
I like the artwork....

new myself, so I don't have any worthwhile input on the panel itself.....but I like artwork :)

silverdolla

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:March 16, 2021, 02:02:28 am
Re: New to CPO's
« Reply #5 on: February 18, 2010, 05:13:54 pm »
Great artwork- and thank you for the template sample ( just what i needed)

foolhand

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 18, 2011, 09:18:10 am
Re: foolhand's thread
« Reply #6 on: March 03, 2010, 06:39:53 pm »
Well here's what I've been kicking around for a marquee.
I realize it doesn't really match my cpo, but there's only so much wolverine and ryu I can take. ;)
I'm still planning on keeping them changeable for future graphics.
Tell me what you guys think.

foolhand

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 18, 2011, 09:18:10 am
Re: foolhand's thread *new marquee 06/2010*
« Reply #7 on: June 24, 2010, 09:06:56 pm »
Well, here's what I've been throwing around lately. Another marquee, the name comes from my favorite arcade when I was a kid. Pictures not cleaned up much, but I usually do that in the end.
« Last Edit: June 24, 2010, 09:15:44 pm by foolhand »