Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: no power- Hantarex Polo 25 in  (Read 1322 times)

0 Members and 1 Guest are viewing this topic.

MLew

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 114
  • Last login:May 10, 2018, 08:38:25 am
no power- Hantarex Polo 25 in
« on: January 18, 2010, 10:08:57 am »
I just swapped out monitors and now have a 25 in Hantarex Polo in my cab. I didn't have a matching connector to the mains input, so I just inserted the exposed wires into the input connector on the chassis for a quick fix :)

Well, while adjusting the monitor controls, the wires slipped out and touched eachother (there is 2 of em).

There was a small spark and now there is no power....to the entire cabinet 

The monitor, jamma, speakers, nothing. I don't know where to start looking for what's wrong.



P.S. I posted this problem in the main forum, but thought I'd ask this side of town as well. If I'm in the wrong, it shall be deleted. Thanks!
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: no power- Hantarex Polo 25 in
« Reply #1 on: January 18, 2010, 01:08:49 pm »
check fuses
Logged

southmonitor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
  • Last login:September 18, 2010, 08:10:10 pm
Re: no power- Hantarex Polo 25 in
« Reply #2 on: January 24, 2010, 10:00:24 pm »
Check main Power Supply. Use a multimeter and check if you have AC power coming to the Power Supply and if it is delivering DC at the outputs.
Logged
Pages: [1]
  
Go Up
« previous next »