Main > Main Forum

Trackball mounting plate screws

<< < (3/3)

Brutal E:
The Suzo/happ heavy duty trackball mounting kit is like a 11 dollars plus shipping. I had one of these I was going to use for another project. Great mounting system a steel bracket underneath with 4 locking nuts and rubber insert to protect the bottom of the track ball assembly. Taking apart the control panel was easy. Placed the new mount in, some 3m adhesive spray to adhere it, and this sucker is bullet proof.

BobA:
Found all the right screws and nuts for the trackball mounting plate.

Inside 4 screws that secure the trackball 6-32-2.25 inch flat head with #6 split washers.

Outside 4 lock nuts to secure the plate to the panel 10-32 lock nut with #10 washers.

Note: This plate will mount the Happs trackball or newer Wico trackballs with the larger inside mount holes.
The silver threaded mounts that hold the trackball to the plate are too big for the older Wico trackballs.


Navigation

[0] Message Index

[*] Previous page

Go to full version