Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: PC monitor to Jamma  (Read 1314 times)

0 Members and 1 Guest are viewing this topic.

sunkistshark

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:January 06, 2010, 05:28:30 pm
PC monitor to Jamma
« on: November 25, 2009, 12:09:55 am »
I'm a newbie here building my first cabinet. I have a 19" pc monitor i've cut the cable exposing the 9 wires i'm not sure what each color is. I'm taking a guess that the red/blue and green corrispond with the red/blue and green connections on the jamma harness. But what are the other ones? I know i need to connect grounds and some sync ones.. but i dont know which is which. can someone help me plz.
Logged

Jack Burton

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1384
  • Last login:April 07, 2025, 02:12:05 pm
  • .
Re: PC monitor to Jamma
« Reply #1 on: November 30, 2009, 03:29:18 am »
The color of the wires of the VGA cable may or may not correspond to the colors on the jamma harness.

You will have to pin-out the cable yourself using a multi-meter.

What kind of PC monitor is this?  If the game you plan on playing isn't 31 khz or higher then you are going to have problems. 
Logged
Pages: [1]
  
Go Up
« previous next »