Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: D9200 HELP!  (Read 1638 times)

0 Members and 1 Guest are viewing this topic.

RichSorr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 180
  • Last login:August 29, 2015, 07:27:00 pm
D9200 HELP!
« on: November 12, 2009, 06:38:56 pm »
OK, so my flyback was clicking repeatedly and had a squeeking sound. I found that Q414 was blown and Q413 was dead. Replaced both along with D424. I also noticed some swollen caps, so I went ahead and got the WG cap upgrade kit for this monitor. put everything back together. nothing. I hear the monitor turn on and thats it. No screen flicker or anything. I can't tell if the tube is really glowing or not, but I can see a blue light. I need to get this thing fixed ASAP or I am going to have to bite the bullet and send it in for repair. any ideas would be greatly appreciated. thanks!

Rich

RichSorr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 180
  • Last login:August 29, 2015, 07:27:00 pm
Re: D9200 HELP!
« Reply #1 on: November 13, 2009, 01:34:28 pm »
according to wells the crt is shot. dammit

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: D9200 HELP!
« Reply #2 on: November 13, 2009, 01:41:58 pm »
A blue light? Uh oh that doesn't sound good. Sounds like the tube's been compromised.

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: D9200 HELP!
« Reply #3 on: November 13, 2009, 01:49:07 pm »
Yeah, like a blue light from the neck area ?
That would indicate the neck may be cracked / loss of vaccum.
Not a technician . . . . just a DIY'er.

RichSorr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 180
  • Last login:August 29, 2015, 07:27:00 pm
Re: D9200 HELP!
« Reply #4 on: November 13, 2009, 02:33:33 pm »
A blue light? Uh oh that doesn't sound good.

funny. thats EXACTLY what the tech over at WG said. haha.

Theres no crack in the neck. I guess it just died and when it did it took out the horizontal output circuit. Now my real problem is finding a 33" replacement....