Author Topic: Mamewah and NES EMU (Read 2696 times)

jginiso · « **on:** July 17, 2003, 08:42:13 pm »

Ive been struggling to set up Nester, RockNESX, VirtuaNES etc. to work correctly in Mamewah. My problem is exiting the emu on ESC. Instead of going to Mamewah it goes back to the emu GUI. I tried them all but obviously only need to get one of them to work. Any help would be appreciated.
Thanks
James

P4
WinXP

boarderguy41 · « **Reply #1 on:** July 17, 2003, 08:53:47 pm »

have you tried setting the NES emus to enter full screen mode when roms are loaded?

TalkingOctopus · « **Reply #2 on:** July 17, 2003, 10:15:28 pm »

You can make esc quit in the dos version of virtua nes by editing the config file.

In the windows version, you cannot set esc to quit, however, you can set another key up to exit.

visciouslymamed · « **Reply #3 on:** July 18, 2003, 12:13:45 am »

Quote

In the windows version, you cannot set esc to quit, however, you can set another key up to exit

You can set ESC to exit in the windows version. First, setup the emulator and controls as you want them. Then open your virtuanes.ini and edit this line

[ShortCut]
TBL00=18402E4026403140204000000000000017401140000000000000000000002D4012

to this

[ShortCut]
TBL00=000000000000000000000000000000000000000000000000000000000000010001

Save the file and set the read-only attribute or virtuanes will overwrite the settings.

jginiso · « **Reply #4 on:** July 18, 2003, 07:54:14 pm »

Quote from: visciouslymamed on July 18, 2003, 12:13:45 am

Quote
In the windows version, you cannot set esc to quit, however, you can set another key up to exit

You can set ESC to exit in the windows version. First, setup the emulator and controls as you want them. Then open your virtuanes.ini and edit this line

[ShortCut]
TBL00=18402E4026403140204000000000000017401140000000000000000000002D4012

to this

[ShortCut]
TBL00=000000000000000000000000000000000000000000000000000000000000010001

Save the file and set the read-only attribute or virtuanes will overwrite the settings.

Thanks Viscous this worked great!

Jakobud · « **Reply #5 on:** July 18, 2003, 11:57:57 pm »

Viscious...........that is brilliant. How did you figure out that hack? I saw all those keycodes in the ini but couldnt make sense of any of it.

TalkingOctopus · « **Reply #6 on:** July 20, 2003, 01:01:19 am »

zSnes is the same way. You can set an exit key but not esc. Do you know a work around for that as well?

Thanks alot for the virtuanes tip btw.

jakejake28 · « **Reply #7 on:** July 20, 2003, 01:19:12 am »

Quote from: TalkingOctopus on July 20, 2003, 01:01:19 am

zSnes is the same way. You can set an exit key but not esc. Do you know a work around for that as well?

Thanks alot for the virtuanes tip btw.

d/l zsnesfe the fe freindly version... thanx to wonderboy. heres a mirror

www.geocities.com/jakejake28


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Mamewah and NES EMU (Read 2696 times)

jginiso

Mamewah and NES EMU

boarderguy41

Re:Mamewah and NES EMU

TalkingOctopus

Re:Mamewah and NES EMU

visciouslymamed

Re:Mamewah and NES EMU

jginiso

Re:Mamewah and NES EMU

Jakobud

Re:Mamewah and NES EMU

TalkingOctopus

Re:Mamewah and NES EMU

jakejake28

Re:Mamewah and NES EMU