Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Standard Jamma Video Connector to Hantarex 9000  (Read 2392 times)

0 Members and 1 Guest are viewing this topic.

mooro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:December 06, 2009, 03:28:35 pm
Standard Jamma Video Connector to Hantarex 9000
« on: October 02, 2009, 02:18:41 pm »
Hi Guys,

Noob here so be gentle. Bought an old non dedicated cab that I am now converting to a fresh mame install. Just about getting there, but decided to redo all the wiring.

My new jamma loom arrived today, but the video has a 5 wired/pinned connector, whereas the connector currently into the hanterex chassis is 6 wired.

Any idea of what I do here? Just splice the new wires into the old like for like, or is there more to it then that??

Cheers,

mooro

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: Standard Jamma Video Connector to Hantarex 9000
« Reply #1 on: October 02, 2009, 03:27:29 pm »
the mtc9000 has an extra connector for vertical sync
connector on mtc is
1-red
2-green
3-blue
4-video ground
5-vertical sync
6-horizontal sync/composite sync

use horizontal sync

mooro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:December 06, 2009, 03:28:35 pm
Re: Standard Jamma Video Connector to Hantarex 9000
« Reply #2 on: October 02, 2009, 03:46:03 pm »
the mtc9000 has an extra connector for vertical sync
connector on mtc is
1-red
2-green
3-blue
4-video ground
5-vertical sync
6-horizontal sync/composite sync

use horizontal sync

Thanks for that. Are you saying then I can do away with vertical synch?

Or do I put both vert/horizontal synch wires into the composite synch pin?

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: Standard Jamma Video Connector to Hantarex 9000
« Reply #3 on: October 02, 2009, 04:35:18 pm »
i would connect both vert and hori to the comp sync but you can do both options

hantarex can be picky on vert sync on namco and snk stuff btw-if you do get a problem with vert rolling then connect a 5k resistor from the vert sync pin to video ground on the actual monitor signal plug

mooro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:December 06, 2009, 03:28:35 pm
Re: Standard Jamma Video Connector to Hantarex 9000
« Reply #4 on: October 27, 2009, 09:49:05 am »
Thanks for your help Grant. Worked fine with just the comp/horizontal synch.