Author Topic: GREEN BKG Trimmer Pot Value (Read 1683 times)

FrizzleFried · « **on:** June 10, 2009, 05:42:09 pm »

The Green BKG Trimmer Pot on my Eygo/Wei-Ya G07 replacement chassis neckboard is trashed. Anyone know the correct value to replace it with?

FrizzleFried · « **Reply #1 on:** June 10, 2009, 07:35:20 pm »

The answer is: 10Kohms...

Kevin Mullins · « **Reply #2 on:** June 10, 2009, 07:46:30 pm »

Available schematics state 5K......but when in doubt, measure one of the others of similar function. (i.e. Red, Green, Blue pots)

FrizzleFried · « **Reply #3 on:** June 10, 2009, 07:50:43 pm »

Available schematics state 5K......but when in doubt, measure one of the others of similar function. (i.e. Red, Green, Blue pots)

The pot itself has "103"...

...and I was told 103 = 10K ohm?

FrizzleFried · « **Reply #4 on:** June 10, 2009, 10:25:50 pm »

Welp... the 10K pot worked. I did find 5K pots on the remote adjustment boards though...

Kevin Mullins · « **Reply #5 on:** June 10, 2009, 11:58:09 pm »

Yeah, if it was marked with the 103 then that's a 10K.

There's been other discrepencies like whether it's a 5K or a 10K pot found on schematics from some of these.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news