Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Problem with connecting toshiba monitor to a pc  (Read 1313 times)

0 Members and 1 Guest are viewing this topic.

WaseemOnLiNe

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:March 23, 2009, 07:11:13 pm
Problem with connecting toshiba monitor to a pc
« on: March 23, 2009, 07:01:11 pm »
I have a sega rally coin machine, and I want to use this screen to connect it to another machine (for example computer) I did that, but it doesn't work properly, the screen splite to two sections while i'm at desktop, and when at first booting period, the screen looks noisy.
the screen model is :

toshiba a68kju96x

What should I do? please some body help me for this situation.
thank for every one who try to help.

qrz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
  • Last login:October 24, 2015, 03:04:15 pm
  • wrangling electrons since 1978
Re: Problem with connecting toshiba monitor to a pc
« Reply #1 on: March 25, 2009, 03:39:20 pm »
the computer would need to feed signals the monitor can sync.
a twin pic is likely twice the normal h scan rate.
the "noise" could mean the sig is barely within, or just outside the sync lock range...

check the video card documentation for supported resolutions/scan freqs

the #'s provided just mean it is a 27" toshiba crt  ;)

qrz