Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Generic cabinets with vertical monitors  (Read 2043 times)

0 Members and 1 Guest are viewing this topic.

Stormrider

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 318
  • Last login:September 28, 2014, 11:01:54 am
Generic cabinets with vertical monitors
« on: March 20, 2009, 01:45:08 pm »
Hi. I need photos with decent resolution of cabinets (not Japanese) with vertical monitors. I don't want photos of original cabinets, but generic cabinets like Videoval, Videosonic, etc, (although these have horizontal monitor). I suppose there are generic cabinets like this but with vertical monitor, aren't they? Where could I find some photos? thanx.

TOK

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3604
  • Last login:January 24, 2024, 05:14:24 pm
  • The Game Always Wins
Re: Generic cabinets with vertical monitors
« Reply #1 on: March 21, 2009, 10:06:32 pm »
If you go on klov.com and look at some of the vert shooters like the Raiden series, you'll find Dynamo cabs and others with vert monitors. Lots of cut corner Dynamos, but there is other stuff, too.


XYXZYZ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 48
  • Last login:April 14, 2024, 04:12:37 pm
Re: Generic cabinets with vertical monitors
« Reply #2 on: March 23, 2009, 11:29:23 am »
Here's my 3KOAM Z-back, the screen area seems to be taller than the standard model you often found SF2 in, so I think it was made for a vertical monitor rather than someone just rotating the monitor on a Street Fighter. Though the control panel was cut for 6 buttons...

The graphics are my own, and an operator had a Strikers 1999 kit on it when I bought it. It used to be a Raiden DX I think, it had a Fabtek CPO.