Author Topic: Are chassis and tubes specific to one another? (Read 1089 times)

rslaback · « **on:** March 12, 2009, 01:13:33 am »

Some of you may already be aware that I have a WG 25K7197 monitor that someone did some of their own electrical disengineering on. Rather than spend a bunch of time on it I am going to purchase either a new working board or a new monitor.

Is the only board that will work with my tube going to be a 25K7197 board or are there other (presumibaly WG) CGA boards that might work as well?

Ken Layton · « **Reply #1 on:** March 12, 2009, 02:03:04 am »

Another 25K71xx chassis will work.

SirPeale · « **Reply #2 on:** March 13, 2009, 09:33:17 am »

What are you going to do with the old one?

rslaback · « **Reply #3 on:** March 15, 2009, 08:25:32 pm »

Probably post it up for a few bucks. I am going to wait though until I have another solution. Just in case nothing is available and I have a pro fix the existing board.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Are chassis and tubes specific to one another? (Read 1089 times)

rslaback

Are chassis and tubes specific to one another?

Ken Layton

Re: Are chassis and tubes specific to one another?

SirPeale

Re: Are chassis and tubes specific to one another?

rslaback

Re: Are chassis and tubes specific to one another?