Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: selti SL/760012500 replacement chassis  (Read 2267 times)

0 Members and 1 Guest are viewing this topic.

robotype

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:November 23, 2012, 05:54:42 pm
selti SL/760012500 replacement chassis
« on: February 10, 2009, 05:37:25 pm »
hello anybody knows if I can replace this chassis with a POLO28 or something else?



robotype

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:November 23, 2012, 05:54:42 pm
Re: selti SL/760012500 replacement chassis
« Reply #1 on: February 11, 2009, 10:51:52 am »
near the yoke it says

KF 28
6 B
2L7B
3420

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: selti SL/760012500 replacement chassis
« Reply #2 on: February 11, 2009, 12:43:03 pm »
I've never heard of nor seen that brand before.

robotype

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:November 23, 2012, 05:54:42 pm
Re: selti SL/760012500 replacement chassis
« Reply #3 on: February 11, 2009, 12:48:09 pm »
me neither...
this chassis is faulty so I would need a substitute,
I was thinking POLO28 but how can I know if the impedence is the same? should I read something on the tube?

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: selti SL/760012500 replacement chassis
« Reply #4 on: February 11, 2009, 05:09:55 pm »
Impedance pertains to the yoke on the tube, not the tube itself. Some yokes are "bonded" (glued to the tube) and are not intended to be removed.
« Last Edit: February 12, 2009, 11:08:38 am by Ken Layton »

robotype

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:November 23, 2012, 05:54:42 pm
Re: selti SL/760012500 replacement chassis
« Reply #5 on: February 12, 2009, 04:42:52 am »
yes I did that before, but then I am not able to align the colors perfectly on big tubes like this. also, if I find a new 28" chassis it won't have the yoke so Imust use  the one already on the tube. thanks anyway for the reply!