Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Connecting 360/Wii/PC to LCD TV  (Read 1941 times)

0 Members and 1 Guest are viewing this topic.

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Connecting 360/Wii/PC to LCD TV
« on: February 05, 2009, 07:50:15 am »
I've just got my new Sammy LCD and I would like to know the best way to connect my 360, Wii and PC to it.

The TV has four HDMI ports, one set of component jacks, one set of composite jacks, one VGA and two scarts.

My 360 is only a standard version with no HDMI port. I'm guessing the best thing to do would be to use a VGA splitter/joiner or switch box to connect the 360 and PC to the VGA port and then get a component cable for the Wii to get 480p?

Would there be any problems with connecting the 360 to the TV though a VGA splitter/joiner or switch box? I guess the switch box would be better than a splitter/joiner cable in case I have both sources on at once. Any thoughts?


Blanka

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2248
  • Last login:January 25, 2018, 03:19:28 pm
Re: Connecting 360/Wii/PC to LCD TV
« Reply #1 on: February 05, 2009, 08:58:04 am »
Connect the PC via DVI->HDMI
Wii via scart
360 via VGA.

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: Connecting 360/Wii/PC to LCD TV
« Reply #2 on: February 05, 2009, 11:14:11 am »
Thanks, I hadnt thought about DVI>HDMI for the PC.

I'll still need the component Wii cable to get 480p though will I not? I have it connected by scart at the moment but that limits me to 576i.

Blanka

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2248
  • Last login:January 25, 2018, 03:19:28 pm
Re: Connecting 360/Wii/PC to LCD TV
« Reply #3 on: February 05, 2009, 04:10:06 pm »
If the Wii supports component then you could do that. Thought Wii was 480p @25/30fps, and that all stuff is upsampled from that. So PAL is upscaled 576i from 480p. In that case it is probably better to let the TV do it from the original signal.

ViciousXUSMC

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 213
  • Last login:July 28, 2009, 10:25:53 am
Re: Connecting 360/Wii/PC to LCD TV
« Reply #4 on: February 23, 2009, 03:56:02 am »
If the Wii supports component then you could do that. Thought Wii was 480p @25/30fps, and that all stuff is upsampled from that. So PAL is upscaled 576i from 480p. In that case it is probably better to let the TV do it from the original signal.

Mine is hooked up via component cables.  Wii maxes at 480 and I think its 60hz I also want to say its 480i not 480p but its been so long since I bothered to look that I do not know.

crashwg

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3076
  • Last login:May 24, 2019, 11:01:05 am
Re: Connecting 360/Wii/PC to LCD TV
« Reply #5 on: February 24, 2009, 05:53:49 pm »
Wii outputs 480P.  I don't know much about SCART since I'm a narrow minded American but I'm pretty sure you'd get a better picture with the component.
If there's bees in the trap I'm catching em
By the thorax and abdomen
And sanding the stingers down to a rough quill
Then I dip em in ink, and I scribble a bit
But if it they wriggle then I tickle em until they hold still
Lemme say it again
In my land of pretend
I use bees as a mf'n pen

RetroGreg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 329
  • Last login:March 19, 2022, 06:56:33 pm
Re: Connecting 360/Wii/PC to LCD TV
« Reply #6 on: February 25, 2009, 11:06:32 am »
I hooked up my 360 via vga and it goes through a vga splitter with no loss in quality. I ordered the splitter from monoprice.com, but went with the "better" model of the ones they offered. Should be fine that way if you decide to go that route.

Make sure you hook up the 360 through VGA instead of component because the image is a lot better from VGA (at least in my experience).  :cheers: