Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Type of screws on back of DK panel  (Read 1841 times)

0 Members and 1 Guest are viewing this topic.

audihere

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 20
  • Last login:March 16, 2009, 12:52:06 pm
Type of screws on back of DK panel
« on: January 21, 2009, 12:40:30 pm »
I noticed there are screw holes on the back of my Donkey Kong black wood panel in the upper corners.  What is the callout for the screws used here.  I saw them in the manual, but it didn't list the specs for them.  Thanks.

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: Type of screws on back of DK panel
« Reply #1 on: January 21, 2009, 06:27:13 pm »
on the back of my Donkey Kong black wood panel

Can you be a little more descriptive?
(or maybe I'm just misunderstanding where)

Back door area?
Control panel area?
Monitor area?
Not a technician . . . . just a DIY'er.

audihere

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 20
  • Last login:March 16, 2009, 12:52:06 pm
Re: Type of screws on back of DK panel
« Reply #2 on: January 21, 2009, 06:45:57 pm »
Upper left and right corners of the large black wooden cover that goes on the back side of the cabinet.  I looked at the manual again and it actually looks like part # 01-01-05 is the door itself, but is pointing to basically right where the left screw is.  The right screw is in the same position mirrored over on the other side.  The holes look original, but maybe they aren't?

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: Type of screws on back of DK panel
« Reply #3 on: January 21, 2009, 08:05:05 pm »
I thought that might be what you were looking at in the manual.

Does your back door have a working lock?

I highly doubt those screw holes are factory, typically someone will screw the back door on if they don't have a lock or the key to actually lock the back door in place.
Not a technician . . . . just a DIY'er.

audihere

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 20
  • Last login:March 16, 2009, 12:52:06 pm
Re: Type of screws on back of DK panel
« Reply #4 on: January 21, 2009, 08:45:34 pm »
Yes, I have a tubular cam lock (that I had to drill), and that other beast of a lock also (which I've just been bending the latch upwards to bypass).  What is that other larger lock for?

Spyridon

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1480
  • Last login:February 12, 2025, 09:06:59 am
Re: Type of screws on back of DK panel
« Reply #5 on: January 23, 2009, 11:17:59 am »
Pictures would really simplify this conversation.
My current collection:  Arkanoid^3, Asteroids Deluxe, Centipede, Donkey Kong w/DIIK, Frenzy w/Berzerk multi, Galaga, Galaxian, Gyruss, Mappy,  Missile Command, Multi-Williams, O'Boyles Arcade (Mame), Pac-man,  Sinistar, Star Wars, Tempest, War Gods