Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Hantarex Polo install questions  (Read 1437 times)

0 Members and 1 Guest are viewing this topic.

pickle me stupid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 24, 2009, 01:38:46 am
Hantarex Polo install questions
« on: January 12, 2009, 03:36:01 am »
i have an extra Hantarex Polo chassis
i recapped it as a learning project
now i need to install it to see if i did it right
the tubes i have to test it on are a rca a63adt10x05,or wgec 088x0387.001
will either work


thank  you
Logged
yowzers

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: Hantarex Polo install questions
« Reply #1 on: January 12, 2009, 07:58:19 am »
depends on the chassis,i.e for a 25" monitor it will say POLO 25
depends on the yoke resistance of the tubes as well
depends on the crt  neck pinout
example-
POLO 1 28"
Lh 1.49mh
Lv 24.5mh
Rh 1.6 ohm=horizontal yoke resistance
Rv 11.0 ohm=vertical yoke resistance
Logged
Pages: [1]
  
Go Up
« previous next »