I moved my Dark Legacy game now I have no picture

[Red_aa]

Hi everyone,
   I'm a newbie here and to the arcade world.  So here's what I did I moved my Dark legacy game to the other side of my basement.   On the way I hit one of the dogs toys and it slammed down on the floor(on the bottom not the back).  When I powered it back up it had no picture.  I checked all the plugs and the fuse on the monitor board (WG k7500).   The monitor is powering up I think. It makes that crackling sound it usually dose.  After that i  swapped out the chasie with one recapped from EBay(mine was dark anyhow). That did not help. Can anyone give m a idea what I broke or what to look at next.

[SirPeale]

Does it play blind?

[Red_aa]

Thanks for the reply.  No it dose not.  I look at the numric display on the main board  after it goes thru its start up it scrools E c

[SirPeale]

Sounds like you have another issue than the monitor.  Double check all connections aroundt the board.

[castlesteve]

I may be selling a fully working neotec 25" med res board if you're interested.  I capped it and everything is nice... just dont have a use for it anymore.

I can give you pics of it working with NFL Blitz.  It will come complete (Chassis, neckboard, remote and yoke)... so it should be able to go right on your 7500 tube without issue.    Will require you to do real basic convergence... but it's not too hard.  You'll have to pull the entire monitor out or use a big mirror to see what you're doing.

let me know else ill probably put it on ebay later this week.

-s