Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Vector monitor help  (Read 1236 times)

0 Members and 1 Guest are viewing this topic.

SirPoonga

  • Puck'em Up
  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 8188
  • Last login:July 20, 2025, 03:37:24 pm
  • The Bears Still Suck!
Vector monitor help
« on: December 04, 2008, 11:14:02 pm »
I have a WG 19v2000 that I know has a good tube and a EH G05 that works but has nasty burn in can I put the electronics from the EH into the WG (or tube from WG to EH)?
Logged

qrz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
  • Last login:October 24, 2015, 03:04:15 pm
  • wrangling electrons since 1978
Re: Vector monitor help
« Reply #1 on: December 07, 2008, 09:17:41 pm »
as long as the size and crt pinouts match, the tube can be subbed .
however, to avoid potential compatabilty issues , use the yoke from the working chassis

qrz
Logged

SirPoonga

  • Puck'em Up
  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 8188
  • Last login:July 20, 2025, 03:37:24 pm
  • The Bears Still Suck!
Re: Vector monitor help
« Reply #2 on: December 08, 2008, 12:08:40 pm »
Is replacing the yoke easy?

In theory i think it should work.  The WG 19v2000 is WG's clone of the EH G05.  The circuits are essentially the same.  I have a WG19v2000 I've been wanting to get working for a couple years.  However, I am not inclined to work with the HV circuit.  I know the problem lies in the HV circuit.
Logged
Pages: [1]
  
Go Up
« previous next »