Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Sparks! And now nothing :(  (Read 1457 times)

0 Members and 1 Guest are viewing this topic.

Nemss316

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
  • Last login:April 28, 2010, 10:30:00 am
Sparks! And now nothing :(
« on: December 03, 2008, 05:19:03 pm »
Well, I was recently installing my new speakers for my PC in my MAME cabinet. I placed the speaker control on the coin return door, and I closed my cabinet. Moved the cabinet back against the wall, plugged in my powerstrip and BAM! Saw a spark; and my monitor went dead. The marquee light is also dead.

I have no idea where to start. I double checked my powerstrip, and it is working. My computer also turns on, but I get nothing from the monitor at all. I haven't really checked anything as far as the monitor goes, as I've been pretty bummed about it over the past couple days.

Any ideas on where to start??

Thanks!

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: Sparks! And now nothing :(
« Reply #1 on: December 03, 2008, 05:35:15 pm »
where did the spark come from and have you checked any of the fuses

Nemss316

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
  • Last login:April 28, 2010, 10:30:00 am
Re: Sparks! And now nothing :(
« Reply #2 on: December 03, 2008, 05:43:21 pm »
The sparks looked like they came from near the isolation transformer. There are some wires down there where the power supply once sat. I have not checked any of the fuses yet; I'm assuming the fuses on the monitor board itself??

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: Sparks! And now nothing :(
« Reply #3 on: December 03, 2008, 05:48:00 pm »
should be fuses on the transformer input/output and on the monitor chassis
tbh if you have any bare wire down by the transformer its most likely one shorted to earth and the spark you saw was the fuse blowing crapless
make sure any bare wires are capped off/insulated before going any further


Nemss316

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
  • Last login:April 28, 2010, 10:30:00 am
Re: Sparks! And now nothing :(
« Reply #4 on: December 04, 2008, 11:32:47 am »
Grantspain, thanks for the quick responses. I am going to check the monitor tonight, and hopefully figure out where to start. I'll be sure to post an update as soon i as i see anything!