Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: pc booting problem on arcade monitor  (Read 1142 times)

0 Members and 1 Guest are viewing this topic.

juice lee

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:November 09, 2008, 10:57:02 pm
pc booting problem on arcade monitor
« on: November 05, 2008, 11:27:42 am »
i formated installed xp and drivers for 7800gtx set resolution to 640x480 60hz, and i still getting problems when i boot with arcade monitor pluged in(bad clicking noise on the post)
it is fine if i boot with pc monitor then change it in display to the arcade monitor

i am using a j pac which is switched to 15 khz and set soft 15 khz up and arcade monitor is samsung

here is link to my cab  http://www.arcadecabinets.co.uk/index.php?option=com_content&task=view&id=12&Itemid=32 pic of cab

here is a video link of what happen  
you will see soon as ram finish, clicking start

here is link to inside cab

i have not had this trouble with arcade vga 2 pcie

thanks for your time






« Last Edit: November 05, 2008, 12:22:45 pm by juice lee »