Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: black faint bars moving in my medium resolution K 7500 help  (Read 1246 times)

0 Members and 1 Guest are viewing this topic.

ctozzi

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 408
  • Last login:November 24, 2022, 01:05:42 pm
black faint bars moving in my medium resolution K 7500 help
« on: November 02, 2008, 11:46:18 pm »
when i looked at the monitor it was fine, now that its at my house it has these faint black bars going from top to bottom. Any help appreciatted
Logged
Current Cab's
Dedicated Killer Instinct 1
Mortal Kombat 1,2,3
Terminator 2
Rampage WT
WWF Wrestlemania
MAME MK1
Zelda Theme Bartop

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: black faint bars moving in my medium resolution K 7500 help
« Reply #1 on: November 03, 2008, 02:26:27 pm »
sounds like an earth related issue,make sure you monitor frame reads continuity to the earth pin of the machine plug
Logged

Tenn_pin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:January 01, 2014, 06:57:02 pm
Re: black faint bars moving in my medium resolution K 7500 help
« Reply #2 on: November 08, 2008, 11:48:23 pm »
I just had the same issue with a 4600 series.  I had to run a wire from the monitor chassie to the board ground (corner screw hole) and then to the neg pole on the power supply.  Good luck.  I fought this thing for over a month after a cap kit.

R
Logged
Pages: [1]
  
Go Up
« previous next »