Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: My brand new Happ coin mech spits out new state quarters esp Idaho?! *Fixed*  (Read 1775 times)

0 Members and 1 Guest are viewing this topic.

mrclean

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1532
  • Last login:August 10, 2022, 08:30:36 am
  • World Record Holder for Gun Smoke Dedicated & MAME
    • Guscade
Most of the times the quarters seem to go through the coin mech brand new from happ, and sometimes they get stuck. Especially certain new state quarters such as Idaho ? Can any one tell me a way to alleviate this issue ? my older green one "5301-10 "which is probably 20 years old seems fine and doesnt have the same issue. Off Taito cabinet
« Last Edit: October 16, 2008, 12:13:17 pm by mrclean »
2,370,650 Gun.Smoke

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
New quarters are probably a tad bit thick and jamming/rubbing on the gate magnet. There is a thickness adjusting screw for the gate magnet.

mrclean

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1532
  • Last login:August 10, 2022, 08:30:36 am
  • World Record Holder for Gun Smoke Dedicated & MAME
    • Guscade
Side A


which screw do I turn, and to the left or right ?

Side B
« Last Edit: October 16, 2008, 11:28:49 am by mrclean »
2,370,650 Gun.Smoke

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Top screw in the first picture. About a 1/4 of a turn to the right (clockwise) should be enough.
« Last Edit: October 16, 2008, 12:28:56 pm by Ken Layton »

mrclean

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1532
  • Last login:August 10, 2022, 08:30:36 am
  • World Record Holder for Gun Smoke Dedicated & MAME
    • Guscade
Top screw. About a 1/4 of a turn to the right (clockwise) should be enough.

Sweet seems to of worked! on the dozen or so I tested. Thanks  :applaud:
2,370,650 Gun.Smoke