Author Topic: I-PAC4 Issue (Read 1152 times)

rayzor45 · « **on:** October 03, 2008, 11:25:32 am »

All,

Just finished wiring my control panel (4-Player) last night an I'm already having issues.

For some reason only players 2-4 are working (right side of my control panel). The only way i can get the buttons & joysticks to work for players 1 &3 is if i hold down button number 6 for that particular player. I checked the wiring a thousand time and can find anything wrong and i configured the I-pac with the recommend key codes. If anyone could help me I would really appreciate it!!!!!!!!

Hoopz · « **Reply #1 on:** October 03, 2008, 12:07:17 pm »

When you first boot the pc, does the LED on the Ipac light and stay lit or flash? The number of flashes indicates any wiring issues, ground problems etc.

rayzor45 · « **Reply #2 on:** October 03, 2008, 12:23:05 pm »

thanks for the quick reply!

It come us just fine. Lights up and then stays lit. I don't know what to do!

Ginsu Victim · « **Reply #3 on:** October 03, 2008, 01:58:59 pm »

unhook everything and rewire it, checking each player as you go


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: I-PAC4 Issue (Read 1152 times)

rayzor45

I-PAC4 Issue

Hoopz

Re: I-PAC4 Issue

rayzor45

Re: I-PAC4 Issue

Ginsu Victim

Re: I-PAC4 Issue