Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Paint then drill, or drill then paint?  (Read 3532 times)

0 Members and 1 Guest are viewing this topic.

blind_dado

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • Last login:March 17, 2019, 07:34:32 pm
    • Arcade Odyssey
Paint then drill, or drill then paint?
« on: September 18, 2008, 10:41:22 am »
When building a control panel, is it better to drill the button holes first and then paint, or the other way around?
Logged

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: Paint then drill, or drill then paint?
« Reply #1 on: September 18, 2008, 10:47:59 am »

Most people don't use paint.  They use laminate or a printed adhesive overlay.  I imagine with paint it all comes down to how much confidence you have in making a clean hole.
Logged

blind_dado

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • Last login:March 17, 2019, 07:34:32 pm
    • Arcade Odyssey
Re: Paint then drill, or drill then paint?
« Reply #2 on: September 18, 2008, 10:50:54 am »
But I thought that you needed to paint before you put down your CPO so that it bonded well and the MDF was "sealed" properly.
Logged

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: Paint then drill, or drill then paint?
« Reply #3 on: September 18, 2008, 11:21:22 am »
Quote from: blind_dado on September 18, 2008, 10:50:54 am
But I thought that you needed to paint before you put down your CPO so that it bonded well and the MDF was "sealed" properly.


Primer.  And you don't have to care about how good the primer looks.
Logged

blind_dado

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • Last login:March 17, 2019, 07:34:32 pm
    • Arcade Odyssey
Re: Paint then drill, or drill then paint?
« Reply #4 on: September 18, 2008, 11:25:28 am »
I guess I'll prime then drill and skip the paint for the CPO top (and bottom).  Thanks!
Logged

mccoy178

  • It's hard to work with a straight jacket on
  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3127
  • Last login:September 03, 2021, 10:23:42 am
  • Go Bucks!
Re: Paint then drill, or drill then paint?
« Reply #5 on: September 18, 2008, 10:59:43 pm »
I drilled then primed due to the unprotected areas that would result from drilling out the holes.
Logged

BobtheAddict

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 63
  • Last login:October 29, 2010, 12:00:22 am
  • Icy Cold Beverages
Re: Paint then drill, or drill then paint?
« Reply #6 on: September 19, 2008, 09:45:38 pm »
I would suggest to drill and then spay on your primer. Although you will not see the top, it is good practice to do all your woodworking first then sand and paint.

Just my 2 nickles!
Logged
BobTheAddict

ghettodish

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 303
  • Last login:October 21, 2017, 03:41:58 pm
Re: Paint then drill, or drill then paint?
« Reply #7 on: December 11, 2008, 03:22:42 pm »
I drilled, oil-primed with rattle can of Cover Stain primer (Zinsser, sold at Home Depot), then sanded smooth.
Logged
Pages: [1]
  
Go Up
« previous next »