Author Topic: new design for plexi (Read 5414 times)

wildbill · « **on:** September 04, 2008, 03:48:12 pm »

what do ya think

wildbill · « **Reply #1 on:** September 23, 2008, 11:52:46 am »

Nothin'

Ginsu Victim · « **Reply #2 on:** September 23, 2008, 12:24:35 pm »

If you want to make some generic ones that would work for MAME cabinet hobbyists, awesome, but I don't see how this would appeal to us, otherwise.

You're doing fine work as far as your art is concerned. Just aiming it at the wrong people here. The majority of us have no use for this particular piece.

wildbill · « **Reply #3 on:** September 25, 2008, 12:29:45 pm »

What would you suggest on posting , I do just about anything from cp , side decals, marquees. anything custom, reprints

Ginsu Victim · « **Reply #4 on:** September 25, 2008, 01:59:38 pm »

Like I said, just some examples of generic art that would work well for MAME cabinets or multi-game systems.

ivwshane · « **Reply #5 on:** September 26, 2008, 02:38:57 am »

What exactly is the question?

The artwork looks great but what is it for?

unclet · « **Reply #6 on:** September 26, 2008, 08:32:08 pm »

Looks like a bezel to me ...... for a Pirates of the Caribbean themed cabinet.

WunderCade · « **Reply #7 on:** September 26, 2008, 08:41:32 pm »

Looks awesome. Is there a game that goes with it?
Very nice job.

Quote from: wildbill on September 04, 2008, 03:48:12 pm

what do ya think

Ginsu Victim · « **Reply #8 on:** September 26, 2008, 11:04:10 pm »

Here is his site
http://www.funcomfg.com

somunny · « **Reply #9 on:** September 27, 2008, 02:15:45 pm »

Needs more lightning.

wildbill · « **Reply #10 on:** September 29, 2008, 03:34:25 pm »

This Design Is for one of our video poker games.It is a plexi bezel.
When I get more time I will post more art work . We do have a Mame cabinet that we produce for home use. It has a matrix thyme to it , which I have had mixed reviews for it. We are trying to figure out a good generic name for it.
HAHA I just got the more lightning post

touche
You can check out our web page www.funcomfg.com to se mor of our work.
Thanx ginsu victim for posting our website. And thank you for all the replys and ?'s. This helps me out a lot.

Ginsu Victim · « **Reply #11 on:** September 29, 2008, 03:44:59 pm »

I was one of those who questioned the Matrix theme. After the two sequels turned out to be pretentious crap, most people have shunned it.

WunderCade · « **Reply #12 on:** September 29, 2008, 07:45:37 pm »

Quote from: wildbill on September 29, 2008, 03:34:25 pm

This Design Is for one of our video poker games.It is a plexi bezel.
When I get more time I will post more art work . We do have a Mame cabinet that we produce for home use. It has a matrix thyme to it , which I have had mixed reviews for it. We are trying to figure out a good generic name for it.
HAHA I just got the more lightning post touche
You can check out our web page www.funcomfg.com to se mor of our work.
Thanx ginsu victim for posting our website. And thank you for all the replys and ?'s. This helps me out a lot.

Can you guys do glass bezels using the same process you use to apply the art to plexi? And we can just send you the art we want on it?

wildbill · « **Reply #13 on:** September 30, 2008, 11:10:04 am »

Depends on how big the glass is and how thick . But sure I can do it on glass , like marquee's and things like that. And yes you can send us your artwork or design of what you want and we can produce it and apply it. Our size constrant is 24" wide for printing.

Ginsu Victim · « **Reply #14 on:** September 30, 2008, 11:12:10 am »

Quote from: wildbill on September 30, 2008, 11:10:04 am

Our size constrant is 24" wide for printing.

Though that would work for me, that rules out a lot of cabinets on this site.

wildbill · « **Reply #15 on:** September 30, 2008, 11:16:33 am »

Why is that?

Ginsu Victim · « **Reply #16 on:** September 30, 2008, 11:25:04 am »

For restorations of older cabinets, your service may come in VERY handy.

wildbill · « **Reply #17 on:** September 30, 2008, 11:38:39 am »

For side decals yes, but for bezels, marquees and keypads no, I can print as long as you want but the width is 24"
So if your marquee is 27" I would just print it the long way.
And at the present time we are looking to a bigger printer for side decals and bigger bezels. So in the near future all sizes will be possible.

Ginsu Victim · « **Reply #18 on:** September 30, 2008, 11:51:11 am »

24" x infiinity....yeah, that'll work for most of us

wildbill · « **Reply #19 on:** September 30, 2008, 12:23:36 pm »

Thought it would.

WunderCade · « **Reply #20 on:** September 30, 2008, 04:22:54 pm »

Quote from: wildbill on September 30, 2008, 11:38:39 am

For side decals yes, but for bezels, marquees and keypads no, I can print as long as you want but the width is 24"
So if your marquee is 27" I would just print it the long way.
And at the present time we are looking to a bigger printer for side decals and bigger bezels. So in the near future all sizes will be possible.

Do you print the art in reverse on the BACK of the bezel like most classic arcade bezels are, or are you limited to having the art on the topside of the bezel?

If you're willing to help out restorers with their obsolete artwork that currently isn't being reproduced, that'd be great. You will get a lot of business my friend. Can we just PM you with what we want or do you want us to go through your website-site email.

Also, what file format do you require, most of us have .AI files.

wildbill · « **Reply #21 on:** October 01, 2008, 12:09:21 pm »

What I do Is mount it on backside of the glass so you cant scratch the art work. If you want it on the front or back of substraight, we can do it.

Go threw our web site and speak with Dan Lewicki in sales or just email me at bburbach@funcomfg.com. Or call 1 800 808 5554 ask for Dan Or me, Bill.

AI files are fine psd, pdf, you know the usual .


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news